Advertisement

Quick Links

603
- IMPORTANT NOTICE -
RESIDENTIAL HOME USE ONLY. Not intended for public areas
such as schools, churches, nurseries, day cares or parks
Parts missing or damaged?
Need assistance with assembly?
Contact Us First!
Please send your request to our central customer
service email: welcome@petitseal.com
One of our customer service agents will reply to
you within 24 hours

Advertisement

Table of Contents
loading

Summary of Contents for Petit SEAL Play House Grande 2003

  • Page 1 - IMPORTANT NOTICE - RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks Parts missing or damaged? Need assistance with assembly? Contact Us First! Please send your request to our central customer service email: welcome@petitseal.com One of our customer service agents will reply to you within 24 hours...
  • Page 2: Assembly And Installation Instructions

    Intended for children from ages 3 to Model: 2003 WARNING: ASSEMBLY BY AN ADULT RETAIN (BOX: 1004) THESE INSTRUCTIONS Swiss Walterli Kft. Petit Seal Simonffy utca 4-6, fszt. 41. Do not use this playset 4025 Debrecen, Hungary until competely assembled and inspected by an adult. welcome@petitseal.com www.petitseal.com...
  • Page 3: Warnings And Safe Play Instructions

    Warnings and Safe Play Instructions CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using this play system.
  • Page 4: Instructions For Proper Maintenance

    Instructions for Proper Maintenance Your Petit Seal Playset is designed and constructed of quality materials with your child's safety in mind. As with all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your Play Set, it is important that you, the owner, properly maintain it.
  • Page 5 Playground Surfacing Materials Section 4 of the consumer product safety commission’s outdoor home playground safety handbook₉ Select Protective Surfacing One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-protective surfacing under and around your play equipment.
  • Page 6: Assembly Information

    Assembly Information Tools Required Robertson Drive Tape Measure Open End Wrench 8’ (2.4m) Step Ladder (Included) Carpenters Level 7/16" (11mm) & 1/2" (13mm) Safety Glasses Ratchet with extension Carpenters Square Adjustable Wrench Adult Helpers Claw Hammer 7/16" (11mm) & 1/2" (13mm) Drill Bits (up to 3/8”...
  • Page 7 About our wood Petit Seal Play Systems uses only premium playset lumber, ensuring the safest product for your children’s use. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
  • Page 8 OCCUPANTS WEIGHT LIMITS TOTAL WEIGHT FALL HEIGHT...
  • Page 10 WOOD IDENTIFICATION...
  • Page 11 WOOD IDENTIFICATION...
  • Page 12: Hardware Listing

    HARDWARE LISTING (Fasteners are shown in full size)
  • Page 13 WALLS WALLS WALLS Part 198 Part 199 Part 198 Part 211 Part 199 Part 211 Part 157 X2 Part 157 X2 Panel is flush to end WALLS of frame #8 x 1.00 Wood Screw X6 In all other holes Panel is flush to end These (4) circled holes use of frame at ends #8 x 1.00 Wood Screw X6...
  • Page 14 WALLS WALLS WALLS STEP 1 - Layout all parts as shown Part 161 X2 STEP 1 - Layout all parts as shown Flush to panel Part 161 X2 Part 193 Part 184 X2 Flush to panel Part 193 Part 184 X2 Part 183 X2 Part 183 X2 Part 167 X2...
  • Page 15 WALLS WALLS Part 183 Part 183 Part 161 X16 Part 161 X16 Part 193 X3 Part 193 X3 70.00 [1778] 70.00 [1778] With all parts flush to panel and frames With all parts flush to panel and frames attach using #8 x 1.00" Wood Screw X38 attach using #8 x 1.00"...
  • Page 16 REINFORCE TOP PANEL AND FRAME #8 x .75 Truss Hd. Screw X4 WALLS .63 [16.0] from edge, locate REINFORCE TOP PANEL AND FRAME evenly between screws installed #8 x .75 Truss Hd. Screw X4 .63 [16.0] from edge, locate evenly between screws installed Part 194 X7 [16.0] Part 194 X7...
  • Page 17 WALLS Part 211 Part 211 Part 157 X2 Part 157 X2 Part 190 Part 214 Part 190 Part 214 Part 198 Part 198 Panel is flush to end of frame WALLS Part 191 X8 Panel is flush to end of frame at ends Flush Part 191 X8...
  • Page 18 WALLS Part 192 Part 192 Part 194 Part 194 Part 212 Part 212 Part 190 X2 Part 190 X2 Part 183 Part 183 Part 161 Part 161 With all parts flush to panel and frames attach using #8 x 1.00" Wood Screw X28 With all parts flush to panel and frames attach using #8 x 1.00"...
  • Page 19 WALLS REINFORCE TOP PANEL AND FRAME #8 x .75 Truss Hd. Screw X4 .63 [16.0] from edge, locate evenly between screws installed [16.0] WALLS Carefully flip wall over Center this plate on seam Flush .688 [17.5] Locate plate as shown at (3) locations and attach with #8 x .75 Truss Hd.
  • Page 20 WALLS Part WALL 3 Part 307 X2 Center on seam Part WALL 3 Wall assemblies flush #8 x " Truss Head Screw ASSEMBLE (2) SIDEWALL ASSEMBLIES ASSEMBLE (2) SIDEWALL ASSEMBLIES 1. Locate all panels onto frame before attaching. 1. Locate wall assemblies as shown and attach using wall brackets. Parts Required: Parts Required: 2.
  • Page 21: Top View

    STAND WALLS 70.000 [1778.0] 35.000 35.000 TOP VIEW [889.0] [889.0] 70.000 [1778.0] Frames flush Frames flush along seams and top/bottom #8 x 2.25" Wood Screw NOTE: IF THE PLAY HOUSE WILL BE INSTALLED ONTO THE PLAY DECK XXL, IT'S RECOMMENDED TO STAND WALLS ON THE DECK. TWO PEOPLE required to stand walls to avoid damaging walls Parts Required: Stand any two walls and align corners flush to adjacent wall as shown...
  • Page 22 ROOF 1. Locate all panels onto frame before attaching. 1. Attach (2) brackets to a roof sections as shown. Parts Required: Parts Required: 2. Attach panels as shown. 2. Make (4) Roof/Bracket Assemblies. 194 X7 305 Plate X4 Roof 1 X2 3, Carefully flip wall over.
  • Page 23 ROOF Support here STEP 1 - Attach roof assembly as shown Hint - Additional person required to support assembly or rest assembly against hut wall. #8 x .75 Truss Head Screw X4 Support both ends of roof #8 x .75 Truss Hd. Screw X4 STEP 2 - Attach roof assembly as shown...
  • Page 24 ROOF HINT - FOR A WATERTIGHT SEAL, USE A EXTERIOR RATED CAULK ALONG THE SEAMS IN THE ROOF Two people required to lift and place the roof assembly onto the hut. The roof will rest on the corners of the hut All corners of the hut walls should be inline with the seam in the roof panel frame when the roof assembly is resting on the hut...
  • Page 25 TARPS Hold tarp centered in opening. Tap snaps at TOP ONLY to leave marks in the wood. Install threaded snaps at each mark. Attach tarp across top onto snaps. Pull tarp down and sideways firmly. Tap snaps to leave marks in the wood. Hold tarp centered in opening and .13 [3.3] Install threaded snaps at each mark above frame, tap snaps to leave marks in...
  • Page 26 TARPS You may remove window tarps and add cutout designs. Use a sharp razor-type blade or scissors. Keep cutting tool away from children until tarp designs are finished. Cutouts must be larger than 9.00 [22.9] to avoid entrapment conditions. (A 9.00 [22.9] ball must fit through all openings) 9.00"...
  • Page 27 PLAYHOUSE INSTALLED ON DECK XXL 306 Bracket X6 Install in (4) corners and (2) front/back walls #8 x .709 Truss Head Screw X2 No washer 0.709 [18.0] #8 x .709 Truss Head Screw X2 #8 Flat Washer X2 (!! Add extra washers if screw protrudes below deck) 1.
  • Page 28: Warranty

    Excludes all, surface cracks, knotholes and knots in the wood components. A note about wood: The wooden components in your Swiss Walterli's (dba. PETIT SEAL) swing set will have natural imperfections such as surface cracks, knots and knot holes. These are natural characteristics of wood. Natural imperfections such as these that do not affect structural integrity are expressly excluded from Warrant.

Table of Contents