RLH Industries Fiber Optic Link User Manual

USER GUIDE
4 Channel 0~10VDC Fiber Converter
Transmit four 0~10VDC Analog Signals over Fiber with High
Speed and Accuracy
This Fiber Op�c Media converter transmits 4 Analog signals over
fiber cable. Offers high end specifica�ons: 78,000 samples a second,
16 bit signal resolu�on, and less than 0.1% source signal variance.
Compa�ble with most PLC's, Sensors (2, 3, or 4 wire), and other
types of equipment where a precise current or voltage
measurement must be taken and transmi�ed over fiber. The system
comprises of a transmi�er (Analog Input) and a receiver (Analog
Output), each device is enclosed in a compact DIN and wall
mountable housing.
This compact and rugged system provides convenient and easy to
read LEDs, supports both single-mode and mul�mode fiber
applica�ons, and includes an alarm on either side monitoring
system power and fiber health. Designed to operate over an
extreme temperature range, providing reliability in harsh
environments. Designed and Made in the USA and covered by our
Limited Life�me Warranty.
Key Features
■ Rugged design – Extreme opera�ng temperature ra�ng
■
Convenient LEDs for power, fiber, and analog signals
■
Single and dual fiber models available
■ Available with ST or SC connectors & single or mul�mode fiber
■
Update rate: 78,000 samples a second
■
16 Bit Signal Resolu�on
■ 99.9% Accuracy or Be�er
■
Alarm contact for status monitoring
■
Redundant Power Inputs
■ Built-in surge, over current, and polarity reversal protec�on
■ DIN rail or wall mount (Includes wall mount ears)
■
Limited Life�me Warranty
■
Made in USA
RLH Industries, Inc. 936 N. Main Street, Orange, CA 92867
RLH Industries, Inc.
Fiber Optic Link
Phone: 800-877-1672
www.fiberopticlink.com
4 Channel 0~10VDC Fiber Converter (transmi�er shown)
Complete System with Transmi�er and Receiver
FAX: 714-532-1885 info@fiberopticlink.com
The leader in
rugged, fiber op�c
technology
UG-M080 2022-03-15
1 1