Table of Contents
Advertisement
Available languages
Available languages
Connecting an Analogue Device
If you have connected an analogue device such as a video recorder via the
aerial socket on your TV you will have to tune it in using Analogue mode. Ensure
the device is switched on before you start the tuning process.
1. Press the MENU button, press the
press OK.
2. Select AUTOMATIC CHANNEL SCAN (RETUNE) and press OK.
3. Press the
buttons to select ANALOGUE and press OK.
4. Press the
buttons to select YES then press OK. The search will
automatically start, this will not delete your Digital channels, so don't worry!
5. When the search has finished the EDIT CHANNEL LIST will appear. Your
analogue channel will be at the end of the channel list.
Channel Selection
•
Press the P + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
Alternative
Press the OK button to enter the Channel List. Then use the
Press the OK button to view the selected channel.
OR
Press the i (info) button then the
If a locked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
•
channel will then be unlocked (refer to Locking Channel for details).
•
Press the
button to return to the previously viewed channel.
Display Channel Information
Press the i button to view the current information.
•
Volume Adjustment
•
Press the V + or – button on the remote control or select volume mode and
rotate the multi-function switch up or down on the back of the TV.
•
If you wish to switch the sound off, press the
volume down while your TV is in mute mode. Press the VOL – button, you
will see the volume level reduce, but you won't hear anything at the moment.
To listen to your TV at the new lower level, press the
+ button.
Using the buttons on the back of the TV
The button on the back of the TV is like a joystick you can push the centre and
move it reft, right, up and down.
•
Press and hold the
button the switch the TV in and out of STANDBY.
•
Press the
button to access the SOURCE menu, press the
to move up and down the menu. Press
VGA
LAN
/
•
Press the
buttons to change channel.
Press the +/- buttons to adjust the volume.
•
JVC 55' LED Smart 4K Ultra HD TV LT-55K870 Manual GR.indd 23
buttons to select INSTALLATION and
buttons to search for a channel you wish to watch then press OK.
button. You can turn the
SubW.OUT
Pr
button again or VOL
R
Pb
L
Y / Video
USB
5V DC max 500mA
to select a source.
Optic.OUT
ANT.
HDMI 1
buttons to highlight and select the channel.
USB 3.0
USB
/
buttons
ARC
Initial Setup
3
23
18/10/2017 10:34
Advertisement
Table of Contents
