GETTING STARTED (CONT.)
3. Replace the filter cover and twist
clockwise to lock. [Figure 1.3]
4. Place the air purifier on a flat, stable
surface with the display facing up. Allow
at least 15 inches / 38 cm of clearance
on all sides of the air purifier. Keep away
from anything that would block air flow,
such as curtains. [Figure 1.4]
Figure 1.3
15 in /
38 cm
Figure 1.4
cover should
snap shut
15 in /
38 cm
U S I N G YO U R
A I R P U R I F I E R
1.
Plug in and tap
purifier. The fan will start on level I.
[Figure 2.1]
2. Optionally, tap
between I, II, and III.
Note:
•
The indicators are not buttons and
cannot be used to change the fan
speed.
•
The fan speed indicators will light up
when active.
•
Fan speed III is the loudest, but cleans
air the quickest.
•
For best results, or to address a specific
air quality issue such as smoke, run the
air purifier at maximum speed (level III)
for 15–20 minutes before using a lower
speed.
•
To effectively clean air, keep windows
and doors closed while the air purifier
is on.
3. Tap
to turn off the air purifier.
Figure 2.1
Memory Function
When the air purifier is plugged in, it will
remember its previous fan speed setting.
Note: The air purifier will not remember timers or
Sleep Mode.
to turn on the air
to change fan speed
7
Need help?
Do you have a question about the Core P350 and is the answer not in the manual?