TOWA TTPDM120S Quick Start Manual

POWER DISTRIBUTION MANAGER
QUICK START GUIDE
Model Number: TTPDM120S
PRODUCT OVERVIEW / INTENDED USE: The TOWA Industries PDM Model TTPDM120S is a power
management appliance that allows multiple AC battery charging systems to be powered off a
single 120V/20A circuit. Each unit can independently power up to 4 AC charge systems, however,
multiple TTPDM120S's can be connected to manage charging for any number of chargers off a
single 120V / 20A line. This expansion capability to manage larger and larger numbers of chargers
is unique to the TTPDM120S, as the total current draw for the system is limited to 16A to allow
you manage battery charging reliably.

SYSTEM COMPONENTS AND SETUP INSTRUCTIONS:

- Input requirements: 120V/20A
- Qty-1, TTPDM120S, Power Distribution Manager
- Qty-1, 120V/20A NEMA 5-20P to C19, 6 ft.
- Qty-1, RJ45 patch cable (optional, supplied separately).

UNIT APPEARANCE AND IDENTIFICATION:

PDM2-120-20
TOTAL LOAD (AMPS)
Front of unit, showing input and 4 shared 120V power outputs
Towa Industries, Inc / 480 E McGlincy Ln, Campbell CA 95008 / 650.204.0019 / info@towatools.com
Display, total
amperage
draw for unit
ACTIVE OUTLET 1
1 2 3 4
STATUS
LED indicator,
output status
Unit front
OUTLET 3 OUTLET 4
OUTLET 2
Switched outputs
(120V/16A total)
LINK LINK
Link ports (see instruction if
needed)
Unit back
NOT SWITCHED
Daisychain
Expansion
AC Input
Outlet
(120V/20A)
(120V/20A)
PROGRAMMING ONLY