Motorola VM855-2 CONNECT Quick Start Manual

QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User's Guide (available
for download from motorolanursery.com).
1.
A. Connecting the Power Supply of the Baby Unit.
MODELS:
VM855 CONNECT
VM855-2 CONNECT
VM855-3 CONNECT
VM855-4 CONNECT
Strangulation hazard. Children have STRANGLED in cords. Keep
this cord out of the reach of children (more than 3 feet away).
Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
B. Connecting the Power Supply of the Parent Unit.
NOTE:
When the baby and parent units are both turned on and within range, the parent unit should
show a color image from the baby unit camera, but if the room is dark, the image will be in black
and white, with an
2. Basic operation of the keys
Parent Unit
Baby Unit
•
3. Setting up the Baby Unit for Wi-Fi® internet viewing
A. Install Motorola Nursery App.
B. View on Compatible Smartphones and Tablets.
1. Open the Motorola Nursery App on your compatible smartphone or tablet.
2. Follow the in-app instructions to create your account and connect to your device.
Please take note of the following minimum system requirements:
Smartphones/Tablets: iOS 10.0, Android™ 7.0
Wi-Fi ® requirements:
At least 0.6 Mbps upload bandwidth per Smart Montitoring Companion, test your Internet
speed at: http://www.speedtest.net/
Setting up your Digital Video Baby Monitor
WARNING:
icon showing, due to the infra-red illumination by the baby unit.
ON/OFF button
0
UP/DOWN buttons
+ -
LEFT/RIGHT
< >
buttons
MENU
M
OK button
O
VIDEO button
V
TALK button
T
Volume buttons
RESET button
ON/OFF switch
PAIR button
Caméra Wi-Fi®
• Connect the small plug of the power adapter to the
Baby Unit and the other end to a suitable electrical
outlet.
• Only use the enclosed adapter (5V DC/ 1500mA).
• Ensure the ON/OFF switch is at the "ON" position.
IMPORTANT:
The Baby Unit is able to operate without power
connection up to 1.5 hours with the support of built-
in rechargeable battery (Lithium-ion battery 3.7V,
1200mAh). Please charge the unit at least 16 hours for
the first time use.
• Connect the small plug of the power adapter to
the parent unit and the other end to the electrical
outlet.
• Only use the enclosed adapter (5V DC/1000mA).
• A rechargeable battery (Lithium-ion battery
2000mAh) inside the Parent Unit allows you to
move it without losing the link and picture from
the Baby Unit. The battery gives up to 5 hours
operation for the Parent Unit. We recommend you
charge it for at least 16 hours before first use, or
when the Parent Unit indicates the battery is low.
• Press and hold the POWER button 0 on the top
of the Parent Unit to turn it ON.
Press and hold to switch the Parent Unit ON/OFF.
Press to tilt the camera upward or downward.
Press to adjust menu settings.
Press to pan the camera left or right.
Press to access different menu options.
Press to open menu options or exit the menu.
Press to confirm a selection.
Press to turn the LCD screen ON/OFF.
Press and hold to talk to your baby.
Press -/+ to select volume level of the Parent Unit.
Press and hold with a small pin to reset the unit.
Slide the power switch to the left to switch on the Unit.
Slide the power switch to the right to switch off the Unit.
Press and hold to pair with the parent unit or
Motorola Nursery Wi-Fi® Setup.
• Scan the QR code with your smart device and download
Motorola Nursery App from the App Store for iOS
devices or from the Google Play™ Store for Android™
devices.
• Install Motorola Nursery App on your device.
Connect to Internet
via Wi-Fi ®
Compatible
Viewing Devices
EN