Information On Display Panel; Temperature Problem; Noise - Bosch KIL 52 Series User Manual

Hide thumbs Also See for KIL 52 Series:
Table of Contents

Advertisement

en Troubleshooting

Information on display panel

Fault
or appears in the temper-
ature display.

Temperature problem

Fault
The temperature differs
greatly from the setting.

Noise

Fault
Appliance has a humming
sound.
The appliance bubbles,
buzzes or gargles.
The appliance clicks.
The appliance makes
noises.
48
Cause
The electronics have detec-
ted a fault.
Cause
Different causes are pos-
sible.
Cause
Not a fault. A motor is run-
ning, e.g. refrigerating unit,
fan.
Not a fault. Refrigerant flows
through the pipes.
Not a fault. Motor, switches
or solenoid valves are
switching on or off.
Fittings wobble or stick.
Bottles or containers are
touching.
Super function is switched
on.
Troubleshooting
Call the after-sales service.
→ "Customer Service", Page 51
Troubleshooting
"Switch off the appliance."
1.
→ Page 39
"Switch the appliance back on after
2.
five minutes." → Page 39
If the temperature is too
warm, check the temperature
again after a couple of hours.
If the temperature is too cold,
check the temperature again
on the following day.
Troubleshooting
No action required.
No action required.
No action required.
Check the removable fittings and, if
required, replace these.
Move the bottles or containers
away from each other.
No action required.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Kil 42 seriesKil 32 seriesKil 22 series

Table of Contents