Removing the power button with fingerprint
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
NOTE:
Applicable only for computers that are shipped with fingerprint reader.
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
memory
modules.
4
Remove the
wireless
card.
5
Remove the fan.
6
Remove the
heat
sink.
7
Remove the
solid-state drive/Intel
8
Remove the
hard
drive.
9
Remove the
display
assembly.
10
Remove the
system
board.
Procedure
1
Lift the power button off the palm rest and keyboard assembly.
2
Lift the power-button with fingerprint-reader board off the palm rest and keyboard assembly.
3
Peel the fingerprint reader cable off the palm rest and keyboard assembly.
74
Removing the power button with fingerprint reader
computer. After working inside your computer, follow the instructions in
Optane.
36
reader
After working inside
www.dell.com/