Table of Contents
Advertisement
Specifications/Dimensions
Rated Capacity*
Rated Efficiency**
Amount of High Capacity Resin (lbs/cu. ft)
Resin Tank Nominal Size (in., dia. x height)
Service Flow Rate (gpm)
Water Supply Maximum Hardness (gpg)
Water Supply Maximum Clear Water Iron (ppm)***
Water Pressure Limits (min.–max. psi)
Pressure Drop at Rated Service Flow (psig)
Water Temperature Limits (min.–max. °F)
Maximum Flow Rate to Drain (gpm)
This system conforms to NSF/ANSI 44 for the specific capacity claims as verified and substantiated by test data.
*
Testing was performed using pellet grade sodium chloride as the regenerant salt.
** Efficiency rating is valid only at the lowest stated salt dosage. This softener was efficiency rated according to
NSF/ANSI 44.
*** Extent of iron removal may vary with conditions. The capacity to reduce clear water iron is substantiated by
WQA test data. Use of Diamond Crystal
Cleaning Iron Out of the Water Softening System section.
18"
38"
®
®
®
Red•Out
or Super Iron Out
will improve iron removal. Refer to
IN-OUT
59"
"
50
1
⁄
2
GNSM48F
(See rating label
on water softener)
(See rating label
on water softener)
67.6/1.30
10 x 47
12
75
3
20–125
12
40–120
2.0
14"
"
3
7
⁄
8
11"
11
Advertisement
Table of Contents
