RO Buddie
Series
®
Models: 540016, 540017, 540019
Installation, Operation & Maintenance Guide
Models #540016
& #540017
Model #540019
Thank you for purchasing
an Aquatic Life RO Buddie
Reverse Osmosis System.
When maintained properly, this unit will
provide you with years of service.
OVERVIEW
Reverse osmosis is the process of removing
contaminants from tap water using a special
semi-permeable membrane. By applying
water pressure across the membrane,
contaminants are concentrated on one side
of the membrane and filtered water on the
other side of the membrane. Therefore,
reverse osmosis units have a waste water
line as well as a filtered line.
In addition to the membrane, water is filtered
prior to the membrane with a sediment
cartridge to remove larger particulates, and
a carbon block to remove chlorine and other
materials.
With the RO Buddie +DI (Model # 540019),
after water is filtered by the membrane,
it passes through a color-changing resin
cartridge where additional total dissolved
solids (TDS) are removed from the water.
WARNING: Please read carefully before
proceeding with installation. Your failure
to follow any attached instructions and
operating parameters may lead to the
product's failure.
WARNING: Do not drink water that has
been filtered with a DI resin cartridge.
1
®
Need help?
Do you have a question about the RO Buddie Series and is the answer not in the manual?
Questions and answers
Your manual is contradictory. The picture shows the carbon filter as the first stage. The next page, you list the sediment filter is the first stage. Which is it?
The correct order of the filter stages in the Aquatic Life Series system is:
1. Sediment Filter (5 micron) – captures dirt, silt, and rust
2. Carbon Block Filter – reduces chlorine and other chemicals
3. Reverse Osmosis Membrane – removes dissolved solids (TDS)
4. (Optional) DI Resin Cartridge – further purifies water but not for drinking
This answer is automatically generated