Twist-In 100 GPD 4-Stage RO/DI Unit
Model: 540371
Installation, Operation & Maintenance Guide
Thank you for purchasing an Aquatic Life Twist-In (TI) Reverse Osmosis
& Deionization Water Unit.
When maintained properly, this unit will provide you with years of service.
For technical assistance or warranty issues,
please contact Aquatic Life at
1-888-548-3480 or 1-818-768-6943
customersupport@aquaticlife.com
Thank You!
See Installation
Video
or email
OVERVIEW
Reverse osmosis is the process of removing
contaminants from tap water using a special
semi-permeable membrane. By applying
water pressure across the membrane,
contaminants are concentrated on one side
of the membrane and filtered water on the
other side of the membrane. This is why
reverse osmosis units have a waste water line
as well as a filtered line.
In addition to the membrane, water is filtered
prior to the membrane with a sediment
cartridge to remove larger particulates,
and a carbon block to remove chlorine and
other materials.
After water is filtered by the membrane,
it passes through a color-changing resin
cartridge where additional total dissolved
solids (TDS) are removed from the water.
The cartridges and membrane on your
unit are designed for easy installation and
replacement. Each cartridge connects to
the filter housing by simply inserting and
twisting. It is important the cartridges be
installed in the correct order to effectively
filter the water.
WARNING: Please read carefully before
proceeding with installation. Your failure
to follow any attached instructions and
operating parameters may lead to the
product's failure.
WARNING: Do not drink water that has
been filtered with a DI resin cartridge.
1
Need help?
Do you have a question about the Twist-In 100 GPD 4-Stage RO/DI Unit and is the answer not in the manual?
Questions and answers