Aquatic Life 540374 Installation, Operation, Maintenance Manual

Twist-In Dual Deionization Filtration Unit
Model: 540374
Installation, Operation & Maintenance Guide
Thank you for purchasing an
Aquatic Life Twist-In (TI) Dual
Deionization Water Filtration Unit.
When maintained properly, this unit will
provide you with years of service.
WARNING: Please read carefully before
proceeding with installation. Your failure
to follow any attached instructions and
operating parameters may lead to the
product's failure.
For technical assistance or warranty issues,
please contact Aquatic Life at
1-888-548-3480 or 1-818-768-6943
customersupport@aquaticlife.com
Thank You!
or email
OVERVIEW
The cartridges on your unit are designed
for easy installation and replacement.
Each cartridge easily connects to the filter
housing by simply inserting and twisting.
It is important the cartridges are installed
post membrane filter to prolong the life of
the deionization (DI) cartridge.
After the water is filtered by a membrane
(not included), there is usually a small
amount of total dissolved solids (TDS)
left in the water.
In certain non-drinking water applications,
it is important to remove the remaining
TDS from the water. This is accomplished
by filtering the water through a resin that
is charged with cation and anion resins
(H+ and OH-). As the resin absorbs the
TDS, it will change color. When the entire
resin has changed color, it is time to
replace the DI filter.
See Installation
Video
Contents (Model #540374)
1 TI Module
TI Color-changing
2 Deionization
Cartridges
Tools & Materials Recommended
for Installation
Screwdriver
1
Blue Tubing,
1
¼" x 4 FT.
Installation,
1 Operation and
Maintenance Guide
Electric Drill