Advertisement
3.2 Curtain Control
As shown in Figure 3-3:
① Select "1 to 6 Pages" label in the panel configuration page and select buttons to be set
at the top (Take button 1 of page 1 as an example).
② Select button mode: the number of objects depends on button mode. For example,
"Combination ON", "Combination OFF", "Combination ON/OFF", "Dbclick/Combined",
"Short/Long Press", "Short Press/Long Jog" and "Clock" can control up to 99 objects,
while "Single ON/OFF", "Single ON" and "Single OFF" can only control 1 object.
③ Click "Targets setting" button on the right to open the page.
④ Click "Read" button.
⑤ Set target parameters:
➢ Subnet/Device ID: enter the corresponding subnet/device ID of motor.
➢ Type: select "Curtain Switch".
➢ Param 1: enter 1.
➢ Param 2: when "Open" is selected, button 1 of page 1 can open the curtain. When
"Close" or "Percentage" is selected, button 1 of page 1 can close or percentage
control the curtain.
HDL Automation Co., Ltd.
http://www.hdlchina.com
Buspro Blinds Motor User Manual
5
Advertisement
