Introduction - HDL MVSM35B.20 User Manual

Buspro Blinds Motor (Model: MVSM35B.20, hereinafter referred to as motor) is specially
designed for blinds, Roman blind, etc. It can open, close, percentage control and move
curtain to a small/large extent. And the switch limiting position of curtain can be set by Buspro
Setup Tool 2.
This user manual offers the information on the configuration of motor in Buspro Setup Tool 2
and Prism Pro/Multi-function Touch Panel. The following tools might be included:
➢ Prism Pro/Multi-function Touch Panel (Model: HDL-MPTFL11.46)
➢ Panel Power Interface (Model: HDL-MPLPI.46-A)
➢ Buspro Blinds Motor (Model: MVSM35B.20)
➢ A computer with Buspro Setup Tool 2
➢ 1-Port Programming Gate Way connected to the router
➢ Dedicated Buspro Cable(s)
Note:
① Please refer to the datasheet attached to the product for the information of installation,
wiring, specifications, etc.
② The pictures in this user manual are for reference only and the actual product should
prevail.
③ Panel button introduction is as shown in Figure 1-1 (The six buttons under the panel
respectively correspond to the six icons of each button page).
HDL Automation Co., Ltd.
http://www.hdlchina.com

1 Introduction

Figure 1-1 Panel button introduction
Buspro Blinds Motor User Manual
1