Advertisement
1. Motor running: to set motor running direction to "Forward" or "Backwards".
2. Drag start enable: select this option to start up motor by dragging.
3. Sure open/off position: to configure the switch limiting position of curtain.
➢ Open position: if 20% is set to open limiting position (20% of the whole track), user
can select 20% in the pull-down menu (mark ① of the page) and click "Test" button.
When motor stops running, user should click "Sure open position" button to complete
the configuration.
➢ Off position: if 80% is set to close limiting position (80% of the whole track), user can
select 80% in the pull-down menu (mark ① of the page) and click "Test" button. When
the motor stops running, user should click "Sure off position" button to complete the
configuration.
4. Delete all position
5. Upward/Down small momentary: to run the curtain upward/down to a small extent.
6. Upward/Down big momentary: to run the curtain upward/down to a large extent.
7. Stop: click to stop the curtain.
8. Read: click to read the current position of the curtain.
9. Test: after open/close/percentage is selected on the right (mark ① of the page), click test
button. If the motor is configured correctly, the motor will run as expected.
HDL Automation Co., Ltd.
http://www.hdlchina.com
Buspro Blinds Motor User Manual
3
Advertisement
