E - Cleaning And Maintenance - omake Omk.BLE01.E15.0101.Z5F User Manual

- Usage:
Before using the appliance for the first time, make sure that the mixing chamber and agitator
attachments are clean.
While the device is on, the chamber can be placed in its place and started. If the chamber is
not in place, the E-1 error will appear on the Display. If the chamber is removed while the
device is running, the device automatically switches to stop. Time and speed values can be
changed while the device is running.
Put the ingredients you want to mix into the hopper and close the lid. Start the mixing
process at the desired speed level.
E – CLEANING AND MAINTENANCE
Cleaning and maintenance after every use;
✓ Make sure that the plug is not plugged in or the switch is turned off while cleaning the
device.
✓ Clean the surface of the device after each use.
✓ Always clean the inside of the pitcher and mixing apparatus after each use.
✓ Do not use abrasive cleaning chemicals as these can leave harmful residues.
✓ Do not use pressurized water and steam while cleaning the device.
✓ Do not clean the outer stainless surface of the device with cleaner that can scratch the
material such as wire wool.
Periodic cleaning and maintenance;
✓ Maintenance should be done by qualified person.
✓ Get the periodic maintenance of the appliance once in every 15 days.
✓ According to the frequency of use, the electrical maintenance of the device should be done
by spraying dry air after the electrical connection is cut.
26