C - Safety Instructions - omake Omk.BLE01.E15.0101.Z5F User Manual

Bar blender
Table of Contents

Advertisement

Available languages

Available languages

C – SAFETY INSTRUCTIONS
-
This device must be installed in accordance with current regulations and used only in
a well-ventilated area. Consult instructions for setting up the device and before use.
-
The device is made for industrial use and should only be used by personnel trained in
.
the device
-
Do not interfere with the device without using appropriate protective equipment.
-
While the device is running, do not push into the chamber with bare hands, moving parts,
screwdriver, etc. It is dangerous and prohibited to interfere with the tools.
-
For the long lasting of the device, never run it idle for a long time. When the device is
not used, it must be turned off. In long-term use, the device should be turned off and
rested for at least 10 minutes every 2 hours.
-
Because of any reason if there is a fire or flame flare where the appliance is used, turn
off all gas valves and electric contractor switch quickly and use fire extinguisher. Never
use water to extinguish the fire.
-
Damages caused by lack of grounding connection will not be covered under warranty.
-
Do not use non-original spare parts on the device. In case you use for the device spare
parts not supplied by our company, the device will be out of warranty.
24

Advertisement

Table of Contents
loading

Table of Contents