Table of Contents
Advertisement
Enabling the VR Port (optional)
h
Follow the steps to enable the VR Port on the front panel:
1� Make sure the system has a VR-ready graphics card installed�
2� Find the HDMI cable in the package� A regular HDMI to HDMI cable will also do�
3� Make certain the system is in power off mode. Connect one end of the HDMI cable
to the graphics card's HDMI port and the other end to the VR Link Port�
2-6
4� If the connection is done properly, the system rear panel should look like below and
the HDMI port on the system front panel will be ready to work�
h
Advertisement
Table of Contents
