Table of Contents
Advertisement
RJ-45 LAN Jack
5
The standard RJ-45 LAN jack is provided for connection to the Local Area Network
(LAN)� You can connect a network cable to it�
LED Color
Yellow
Green
Orange
USB 3�1 Gen1 Port (Optional)
6
The USB 3�1 Gen1 port is backward-compatible with USB 2�0 devices� It supports up to
5Gbit/s (SuperSpeed) data transfer rate�
Line-In
7
This port is used for external CD player, tapeplayer or other audio devices�
1-6
Line-Out
This port is used for speakers or headphones�
Mic
This port is used for microphones�
RS-Out
Rear-Surround Out in 4/ 5�1/ 7�1 channel mode�
CS-Out
Center/ Subwoofer Out in 5�1/ 7�1 channel mode�
SS-Out (Optional)
Side surround sound line out in 7�1 channel mode�
S/PDIF-Out (Optional)
This S/PDIF (Sony & Philips Digital Interconnect Format) connector is provided for
digital audio transmission to external speakers through an optical fiber cable.
Auto Fix Button
8
Press the auto fix button to load default settings when operating system crashes and
power button LED blinks�
Antenna Connector
9
The antenna connector is used for connecting the optional antenna�
Yellow
LED State
Condition
Off
LAN link is not established�
On (steady state) LAN link is established�
On (blinking)
The computer is communicating with another computer on the LAN�
Off
10 Mbit/sec data rate is selected�
On
100 Mbit/sec data rate is selected�
On
1000 Mbit/sec data rate is selected�
Green/ Orange
Advertisement
Table of Contents
