Related Manuals for Bevent Rasch RCMU8-MOD
Summary of Contents for Bevent Rasch RCMU8-MOD
- Page 1 RCMU8/-MOD Control unit Monitoring system MRB FIRE SAFETY 20/11/2018 www.bevent-rasch.com...
-
Page 2: Quick Facts
RCMM for centralised registration, con- an output relay main alarm (A alarm) and a service alarm (B trol and monitoring. RCMU8-MOD is used to connect to alarm). Modbus. Function tests can also be initiated by an external The main alarm is triggered in case of: switch. -
Page 3: Operating Indicators
RCMU will enter alarm mode and the main closed simultaneously alarm will be triggered. Use RCMU8-MOD to connect to a Modbus network. The Function when the LED for DAMPER POSITION is off: network can have free topology and the following informa- - Lit 0.1 s/off 0.1 s in case of overload on one of outputs... -
Page 4: Specification
500 mA tube fuse, delay EMC: EN 50081-1 (1992) Specification EN 50082-2 (1995) Control unit RCMU8 Technical data RCMU8-MOD - ” - RCMU8-MOD - for connection to Modbus network Interface: RS485 (MODBUS-RTU) ACCESSORIES: Communication RCKD/-RD - Smoke detectors speeds: 9600/19200 baud, 8 bit, even parity with termination function All addresses from 0 to 247. -
Page 5: Dimensions And Weight
EXT. LARM C+D DETEKTORER SERVICE TEST ÅTERSTÄLL RCMU 8 16 cpl M12 (3-6,5 mm) 1 cpl M20 (6-12 mm) Weight 2,2 kg Block diagram RCMU8, RCMU8-MOD Detector group Damper group Damper fault Detector alarm Main Detector fault alarm A External alarm... - Page 6 Brand-/Brandgasspjäll BSKC6 EI60 Monitoring system MRB – Control unit RCMU8 Wiring diagram RCMU8, RCMU8-MOD *) 24V AC max. 10VA Detector Damper group A Damper group A When separate group A damper 1 damper 2 thermal sensor is used, connect in series with motor.
Need help?
Do you have a question about the RCMU8-MOD and is the answer not in the manual?
Questions and answers