Table of Contents
Advertisement
MTL01
PREFACE
All rights reserved; no part of this publication may be reproduced, stored in a retrieval system, or trasmitted in any form or by
any means, electronic, otherwise, without the prior written permission of Digicom S.p.A.
The following installation rules should be respected in order to have the best working order of the equipment
and for the user's safety
ENVIROMENTAL CONDITIONS
Enviromental temperature
from -20 a +50°C
Rapid changes of temperature or humidity should be avoided.
This equipment, including cables, should be installed in an area free from:
Dust, humidity, heat from direct sun light.
Objects which irradiate heat. These could cause damage to the container or other problems.
Objects which produce a strong electtromagnetic field (loudspeakers, etc.)
Liquids or chemical corrosive substances.
CLEANING THE TERMINAL
Use a clean and soft cloth. Wet the cloth with water or natural detergent if it is necessary to remove any
stains. Never use chemical products such as petrol or solvents.
VIBRATIONS OR DROPPING
Caution against vibrations and dropping.
WARNING: This is a class A product.
In a domestic environment this product may cause radio interference in which case the user may be required
to take adequate measures.
DECLARATION
We, Digicom S.p.A. with registered office at: via Volta 39 - 21010 Cardano al Campo (Varese - Italy) declare
under our sole responsability that the product:
Name: MTL01
satisfies the basic requirements of the below indicated Directive:
1999/5/CE of March 9 1999, R&TTE.
As having been designed in conformity with the requirements of following Reference Standards:
EN 55022, EN 61000-3-2, EN 55024, EN 60950, ETSI TBR 21
Relative humidity
from 20 to 80% n.c.
OF CONFORMITY
II
Preface
Advertisement
Table of Contents
