Advertisement
Flush Mounting
Follow these steps to flush mount the 5860:
Mounting Holes
Figure 4: Flush Mounting
2
Wiring Connections
Wire the 5860 to the FACP as Shown in Figure 5.
supervised
power limited
Figure 5: SBUS Connections
Installing the 5860
5860 installation involves the following steps:
1. Ensure power is turned off at the panel.
2. Mount the 5860 in the desired location.
3. Connect the 5860 to the panel (see Figure 5).
4. Use the DIP switches on the back of the 5860 to
assign an ID number. (see FACP manual).
5. The new 5860 module must be added to the
system through programming. JumpStart
add the module automatically. Refer to the FACP
manual for more information.
Silent Knight
, JumpStart
, and Honeywell
®
®
5860 Installation Document — P/N 151042:D 07/01/2017
®
are registered trademarks of Honeywell International, Inc.
®
will
Advertisement
