Cleaning The Cooling System; Fuel System Maintenance; Replacing The In-Line Fuel Filter - Toro TimeCutter MX 5025 Operator's Manual

Installing the Spark Plug
Figure 39
Cleaning the Cooling
System
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Remove the air filter from the engine.
4. Remove the engine shroud.
5. To prevent debris entering the air intake, install
the air filter to the filter base.
6. Clean debris and grass from the parts.
7. Remove the air filter and install the engine
shroud.
8. Install the air filter.
Fuel System
Maintenance
DANGER
In certain conditions, fuel is extremely
flammable and highly explosive. A fire or
explosion from fuel can burn you, others, and
can damage property.
• Perform any fuel-related maintenance
when the engine is cold. Do this outdoors
in an open area. Wipe up any fuel that
spills.
• Never smoke when draining fuel, and stay
away from an open flame or where a spark
may ignite the fuel fumes.
g027661
Replacing the In-Line Fuel
Filter
Service Interval: Every 100 hours—Replace the
Never install a dirty filter after removing it from the
fuel line.
1. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
35
in-line fuel filter.