Table of Contents
Advertisement
By pressing Number
TV CH +
1
2
3
4
5
6
7
8
Note
• This function is only for SONY TVs. (This function
may not work on some SONY TVs.)
• If distance between TV and this system is too far, this
function may not work. Install the system near the
TV.
• Keep the remote pointed in the direction of the TV
and this system while the TV button is flashing.
Transmit time
0.5 (Default)
1
1.5
2
2.5
3
3.5
4
Enjoying the Sound of
Other Components
X/x/c
ENTER
With cover opened.
Selecting the connected
component
You can use a VCR or other components
connected to the VIDEO jacks on the rear panel
or AUDIO IN jack on the front panel. Refer to
the operation manual supplied with the
components for further information on the
operation.
Press FUNCTION repeatedly until "VIDEO"
or "AUDIO" appears in the front panel
display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
VIDEO t AUDIO t DVD t ...
Changing the output level of
the sound from the AUDIO IN
jack on the front panel
Depending on the component, distortion occurs
because of the input level when listening to the
component that is connected to the AUDIO IN
jack on the front panel.
FUNCTION
AMP MENU
continued
71
GB
Advertisement
Table of Contents
