Related Manuals for Hyundai power products HFP1100
Summary of Contents for Hyundai power products HFP1100
- Page 1 ELECTRIC WATER PUMP HFP1100 WARNING: Read thoroughly the instruction manual before use.
-
Page 2: Safety Warnings
SAFETY WARNINGS Please note that all instructions must be consulted! Failure to observe the following instructions and warnings may result in electric shock, fire and / or serious injury. Keep all instructions and warnings for future reference. If you are giving this device to another person, please provide this instruction manual as well. - Page 3 will in no case be the responsibility of the manufacturer. - Failure to observe the safety and operating instructions may cause a risk of electric shock, fire and / or injury to persons. - Do not use attachments other than those recommended by the manufacturer;...
- Page 4 - The pump must be supplied through a residual current device (RCD) having a rated residual operating current not exceeding 30 mA. - Protect the appliance and electrical connections against moisture. - In case of flood danger, protect the connectors. - Avoid the discharge of aggressive liquids and the discharge of abrasive materials.
-
Page 5: Intended Use
SYMBOLS Read the instruction manual INTENDED USE The pump is designed to suck clear water and dirty wa ter with particles. The pump must be installed on a flat and solid surface. It is not suitable for professional use (including continuous operation). GETTING STARTED 1. -
Page 6: Working Principles&Technical Specifications
WORKING PRINCIPLES&TECHNICAL SPECIFICATIONS Model HFP1100 Power 1100 W Voltage 230V˜ 50Hz Head max. 10 m Immersion Depth Max. Qmax 19.5m³/h IPX8 Weight 7.5kg Temp max. 35ºC USE OF THE PUMP Your pump is designed for domestic use. Your pump must not be used in following situations: - Water temperature to be sucked is above 35°C... -
Page 7: Troubleshooting
TROUBLESHOOTING Trouble Check Should do The engine does not start Is the pump plugged? Check your electrical installation and does not make noise. Does the pump starts when fully Check that the float can move submerged? freely Pump does not deliver. Does the impeller rotates? Eliminate the reason for blocking Is it in good condition? - Page 8 Low flow or insufficient Are you sure that the pump inlet Clean the zone (s) concerned is not obstructed? and verify check valve, if applicable Is the impeller clean? Connecting a pipe with a suitable Are you sure that the outlet pipe diameter and suppress reduction is not obstructed? of the water passage...
-
Page 9: Warranty
WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 10: Product Failure
PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 11: Warranty Exclusions
WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the HFP1100 and is the answer not in the manual?
Questions and answers