Table of Contents
Advertisement
GETTING TO KNOW YOUR SYSTEM
1
1
Standby
Free space
Remote Control
CH 1
CH 2
CH 3
CH 4
CH
Menu
_
+
Directions for Installing/Changing Batteries:
1.
Open battery compartment on back of remote and
insert (1) 3V Lithium battery (provided).
2.
Ensure the battery is installed correctly with respect to
polarity. (+ and -)
3.
Remove batteries from remote if batteries are
not going to be used for an extended period of time.
4.
Remove used batteries promptly and replace all
batteries of a set at the same time.
5.
Always purchase the correct size and grade of battery
most suitable for intended use.
Indicates SD card is available
Indicates SD card is not available
Indicates cameras are Looping
through Channels
Indicates motion Record is
Engaged
Indicates the channel 1,2,3, or 4
Indicates Signal Strength
Indicates Single Camera View
Indicates Recording is taking
place
Indicates Quad View
Playback
Indicates Pause during Playback
Indicates temporary loss of signal
Indicates temporary buffering for
data storage
Page 6
Press to Power the Monitor ON.
Press to select Channel 1.
Press to select Channel 2.
Press to select Channel 3.
Press to select Channel 4.
Press to Exit Menu
Press to bring up Menu options or
to confirm a selection
Press to move selection downward
Press to move selection upward
Advertisement
Table of Contents
