Page 2
Installation Manual RMGZ200 Table of Contents Safety Instructions ..................3 Description Conditions Product Information .................. 4 Dimensions Scope of Delivery Assembly Preparations ................5 Assembly Conditions ...
Page 3
Installation Manual RMGZ200 1 Safety Instructions All safety related regulations, local codes and instructions that appear in the manual or on equipment must be observed to ensure personal safety and to prevent damage to the equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.
Page 4
Installation Manual RMGZ200 2 Product Information 2.1 Dimensions Fig. 1: Outline Drawing RMGZ200 R200001us Nominal Force Order code Speed Limit Weight [lbs] kg [lbs] [1.33] RMGZ206 [2.2] RMGZ211 [4.5] RMGZ212 40 000 0.57 [1.26] [11.2] RMGZ215 [22] RMGZ221 [67] RMGZ223 Order Code (example): RMGZ221.H14...
Page 5
Before the measuring roller is installed it must be equipped with the pulley. The measuring roller contains a special flange for this purpose. The machine must be prepared for the installation of the RMGZ200. The two corresponding mounting holes must be drilled. For the dimension of the holes refer to outline drawing Fig.1...
Page 6
200 this can be achieved by turning the measuring axes of the sensor parallel to the rotation axis and in direction of the positive force component (refer to Fig.2) Fig. 2: RMGZ200 Red Point alignment on rotating machines Red_Point_Allignment.ai The position of the Red Point and thus the parallelism of both axes can be precisely adjusted with the adjustment screw.
Page 7
3.5 Red Point alignment in static applications In static applications the force measuring rollers are mounted in a way that the red point is aligned in the direction of the resulting force . Fig. 2: RMGZ200 Red Point alignment on rotating machines Red_Point_Allignment.ai 3.6 Wiring...
Page 8
4 Design and Functionality 4.1 Functional Description The Force Measuring Roller RMGZ200 series is used to measure the material tension in wire and cable producing machinery such as planetary cage, tubular, rigid frame stranding machines, bunchers and twisters. Its basic design is that of the RMGZ100B sensor but incorporating an accurate mechanism for the “Red...
Need help?
Do you have a question about the RMGZ200 and is the answer not in the manual?
Questions and answers