Table of Contents
Advertisement
Available languages
Available languages
2. Turn off the Soundbar
Turn off the Soundbar using the Soundbar's remote
control.
• The image of the Soundbar may differ from your
Soundbar, depending on the model.
5 sec
Soundbar
LED Indicator
3. Configure "ID SET" using the Soundbar's
remote control
Press the Up button on the Soundbar remote control for
5 seconds.
• The ID SET message appears on the Soundbar main
unit's display for a short time and then disappears.
• After the ID SET process, the Soundbar power is
automatically turned on.
• Until pairing is complete, the Multicolour LED on the
Soundbar changes as "Red → Green → Blue" in turn.
5 sec
Red → Green →
Soundbar
LED Indicator
Red BlinksX3
Blue Blinks
ENG - 5
4. Check if the LINK LED is solid blue (connection
complete)
The LINK LED indicator stops blinking and glows a solid
blue when a connection is established between the
Soundbar and the Subwoofer.
LINK LED - Blue is On
Advertisement
Table of Contents
