Samsung product. Class II product : This symbol indicates that a safety connection to electrical earth (ground) is not required. If this symbol is not present on a product with a power cord, the product MUST have a reliable connection to protective earth (ground).
Page 3
• To protect this apparatus from a lightning • Contact an authorized service center for storm, or when it is left unattended and information if you intend to install your unused for long periods of time, unplug it from product in a location with heavy dust, high or the wall outlet and disconnect the antenna or low temperatures, high humidity, chemical cable system.
Page 4
To prevent electromagnetic interference with electric appliances, such as radios Dispose unwanted electronics through an approved recycler. To find the nearest recycling and televisions, use shielded cables and location, go to our website:www.samsung.com/ connectors for connections. recycling Or call, 1‐800‐SAMSUNG ENG - 4...
6. Clean only with dry cloth. WARNING: Cancer and Reproductive Harm - 7. Do not block any ventilation openings. Install www.P65Warnings.ca.gov. in accordance with the manufacturer’s instructions. Precautions 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other 1.
– Samsung Electronics Co., Ltd reserves the right to change the specifications without notice. – Weight and dimensions are approximate. Open Source License Notice • To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.request@samsung.com). ENG - 6...
Page 7
Connecting the SWA-W500 to a Soundbar 1. Check the standby status after plugging into an electrical outlet Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer blinks.
Page 8
3. Configure “ID SET” using the Soundbar’s remote control Press the Up button on the remote control for 5 seconds or press the ID SET button located at the bottom of the Soundbar. • Until pairing is complete, the Multicolor LED on the Soundbar changes as “Red → Green → Blue” in turn.
5 Sec Connection failed POWER ID SET 2. Repeat steps 3 through 4. Others Errors Contact a Samsung Service Center. Compatible Models HW-S60T HW-S66T HW-S61T HW-S67T • The model list is subject to change without further notice. • To check compatability with Soundbars to be released after 2020, please refer to the FULL MANUAL of the Soundbar (http://samsung.com/support).
LIMITED WARRANTY TO ORIGINAL PURCHASER This SAMSUNG brand product, as supplied and distributed by SAMSUNG and delivered new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials and workmanship for a limited...