Advertisement
Quick Links
LOWER DISPLAY KEY
(RETURNS CONTROLLER TO
NORMAL DISPLAY FROM SETUP)
FUNCTION KEY
(SELECTS FUNCTIONS WITHIN
EACH CONFIGURATION GROUP
SETUP KEY
(SCROLLS THROUGH
CONFIGURATION GROUPS)
A.
CHANGING THE SET POINT
1.
Press
Display shows SP.
2.
Press
3.
Press
B.
RUNNING A PROFILE (IF APPLICABLE)
For information on how to configure a profile, refer to UDC3200 User Manual, pages 125-131.
1.
Press
profile is running.
REV 0 –24/03/2010 11:54:00
Z:\Electrical\INSTRUCT\INSTRUMENT\HONEYWELL\UDC3200\BASIC OPERATION - UDC3200.doc
HONEYWELL UDC3200 KEYS
UP AND DOWN ARROW KEYS
(INCREASE AND DECREASE)
until Upper Display shows the PV Value and the Lower
or
to change the set point.
to accept the change.
to start a profile. "R" displays in Upper Display to indicate a
BASIC OPERATION – UDC3200
MAN/AUTO KEY
(SELECTS BETWEEN
MANUAL AND AUTO MODE)
SP SELECT KEY
(SCROLLS THROUGH
SETPOINTS)
RUN/HOLD KEY
(START/HOLD PROFILE
OR TIMER)
Page 1 of 2
Advertisement
Related Manuals for Grieve HONEYWELL UDC3200
Summary of Contents for Grieve HONEYWELL UDC3200
- Page 1 BASIC OPERATION – UDC3200 HONEYWELL UDC3200 KEYS LOWER DISPLAY KEY MAN/AUTO KEY (RETURNS CONTROLLER TO (SELECTS BETWEEN NORMAL DISPLAY FROM SETUP) MANUAL AND AUTO MODE) FUNCTION KEY SP SELECT KEY (SELECTS FUNCTIONS WITHIN (SCROLLS THROUGH SETPOINTS) EACH CONFIGURATION GROUP RUN/HOLD KEY...
- Page 2 BASIC OPERATION – UDC3200 TO HOLD A PROFILE (IF APPLICABLE) to hold a profile. “H” displays in Upper Display to indicate a Press profile is held at the current setpoint. PERFORMING ACCUTUNE Press until ACCUTUNE is shown on the lower display. Press until ACCUTUNE is shown on the lower display.
Need help?
Do you have a question about the HONEYWELL UDC3200 and is the answer not in the manual?
Questions and answers