Advertisement
UPPER DISPLAY
(DISPLAYS PROCESS VALUE
DURING OPERATION OR VALUE
OF PARAMETER SHOWN IN
LOWER DISPLAY.)
INFINITY KEY
(PRESS TO BACK UP
ONE LEVEL)
EZ KEY(S)
(PROGRAMMABLE)
(ADVANCES THROUGH PROMPTS)
A.
BASIC OPERATION
1.
If you ever reach a point on the controller where you do not want to be,
press and hold
2.
From the HOME PAGE, press
parameters.
B.
STATIC SET POINT OPERATION
1.
From the HOME PAGE, press
2.
To enable static set point operation after running a profile, perform the
following steps:
a.
b.
c.
REV E – 2/26/15
Z:\Electrical\INSTRUCT\INSTRUMENT\WATLOW\PM\BASIC OPERATION - PM PID rev E.doc
WATLOW PM PID KEYS (1/4 DIN SHOWN)
ADVANCE KEY
for 2 seconds to return to the HOME PAGE.
From the HOME PAGE, press
display and oFF is shown on the upper display.
Press
or
until AUto is shown on the upper display.
Press and hold
to scroll through the display
or
to change the set point.
until C.M is shown on the lower
to return to the HOME PAGE.
BASIC OPERATION – PM PID
INDICATOR LIGHTS:
(DISPLAY TEMPERATURE
UNIT, OUTPUT, PROFILE AND
COM ACTIVITY)
LOWER DISPLAY
(DISPLAYS SET POINT
DURING OPERATION OR
PARAMETER WHOSE
VALUE APPEARS IN UPPER
DISPLAY
UP AND DOWN ARROW KEYS
(MOVE UP/INCREASE AND
MOVE DOWN/DECREASE)
Page 1 of 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Grieve WATLOW PM PID
Summary of Contents for Grieve WATLOW PM PID
- Page 1 BASIC OPERATION – PM PID WATLOW PM PID KEYS (1/4 DIN SHOWN) UPPER DISPLAY INDICATOR LIGHTS: (DISPLAYS PROCESS VALUE (DISPLAY TEMPERATURE DURING OPERATION OR VALUE UNIT, OUTPUT, PROFILE AND OF PARAMETER SHOWN IN COM ACTIVITY) LOWER DISPLAY.) INFINITY KEY LOWER DISPLAY...
- Page 2 BASIC OPERATION – PM PID PROFILE OPERATION ***ONLY APPLICABLE IF CONTROLLER HAS PROFILE OPTION From the HOME PAGE, press to start a profile. will light up to indicate a profile is running. Press to terminate a profile from the HOME PAGE. CHANGE TEMPERATURE UNITS ***NOT REQUIRED FOR NORMAL OPERATION From the HOME PAGE, press and hold...
- Page 3 BASIC OPERATION – PM PID PERFORM AUTOTUNE ***NOT REQUIRED FOR NORMAL OPERATION Once oven is powered on, load parts into oven and set oven to required set point. From the HOME PAGE, press and hold for 3 seconds to enter the OPERATIONS PAGE. Ai is shown on the upper display and oPEr is shown on the lower display.
- Page 4 BASIC OPERATION – PM PID VIEW PID SETTINGS ***NOT REQUIRED FOR NORMAL OPERATION From the HOME PAGE, press and hold for 3 seconds to enter the OPERATIONS PAGE. Ai is shown on the upper display and oPEr is shown on the lower display. Press until LooP is shown on the upper display.
Need help?
Do you have a question about the WATLOW PM PID and is the answer not in the manual?
Questions and answers