Table of Contents
Advertisement
Quick Links
PROFILE INDICATOR LIGHT
(RUN/HOLD STATUS)
PROFILE KEY
(PROFILE RUN/HOLD)
A.
BASIC OPERATION
1.
If you ever reach a point on the controller where you do not want to be, press
repeatedly to return to the Main Page.
If prompted to "Save changes or restore values?", press
2.
changes made or press
3.
If the Profile Indicator Light is on, a profile is running. If it is off, no profile is
running.
B.
STATIC SET POINT OPERATION
1.
Press
2.
Press
3.
Press
4.
Press
REV E –03/01/2017 13:38:00
W:\Electrical\INSTRUCT\INSTRUMENT\WATLOW\F4\OBS\BASIC OPERATION - F4 REV E.doc
WATLOW F4 KEYS
to discard the changes.
or
until cursor is next to SP1 on lower display.
to enter SP1.
or
to change set point.
to accept change.
BASIC OPERATION - F4
ACTIVE OUTPUT
INDICATOR LIGHTS
ALARM OUTPUT
INDICATOR LIGHTS
UP AND DOWN ARROW KEYS
(MOVE UP/INCREASE AND
MOVE DOWN/DECREASE)
LEFT AND RIGHT
ARROW KEYS
(BACK OUT AND NEXT)
to save any
Page 1 of 6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Grieve WATLOW F4
Summary of Contents for Grieve WATLOW F4
- Page 1 BASIC OPERATION - F4 WATLOW F4 KEYS ACTIVE OUTPUT INDICATOR LIGHTS ALARM OUTPUT INDICATOR LIGHTS PROFILE INDICATOR LIGHT (RUN/HOLD STATUS) UP AND DOWN ARROW KEYS (MOVE UP/INCREASE AND MOVE DOWN/DECREASE) PROFILE KEY (PROFILE RUN/HOLD) LEFT AND RIGHT ARROW KEYS (BACK OUT AND NEXT)
- Page 2 BASIC OPERATION - F4 RUNNING A PROFILE Press Press to start a profile. Press until cursor is next to desired profile on lower display. Press to select profile. Press until cursor is next to desired Start Step (usually Step 1) on lower display.
- Page 3 BASIC OPERATION - F4 ADVANCING PROFILE ***NOT REQUIRED FOR NORMAL OPERATION While a profile is running, press Press until cursor is next to Terminate on lower display. Press to terminate profile. Profile Indicator Light will be off. Press Press to start a profile. Press until cursor is next to desired profile on lower display.
- Page 4 BASIC OPERATION - F4 HOW TO CHANGE PASSWORD ***NOT REQUIRED FOR NORMAL OPERATION Once controller is powered on, press until Go to Factory is displayed. Press to select Go to Factory. Press until cursor is next to Set Lockout. Press to select Set Lockout.
- Page 5 BASIC OPERATION - F4 HOW TO AUTOTUNE ***NOT REQUIRED FOR NORMAL OPERATION Once oven is powered on, load parts into oven. Press until cursor is next to SP1 on lower display. Press select SP1. Press to change current set point to desired set point. Press to accept change Press until cursor is next to Go to Operations.
- Page 6 BASIC OPERATION - F4 HOW TO CHANGE SET POINT LIMITS ***NOT REQUIRED FOR NORMAL OPERATION Press until cursor is next to Go to Setup on lower display. Press to select Go to Setup. Press until the cursor is next to the Analog Input1. Press to enter Analog Input1.
Need help?
Do you have a question about the WATLOW F4 and is the answer not in the manual?
Questions and answers