JVC KD-ADV6160 Service Manual page 26

C D
"SYS-TEMP" is
indicated on the LCD.
"CHK MODE" is
indicated on the LCD.
"RUNNING" is
indicated on the LCD.
"MEMCHECK" is
indicated on the LCD.
"INIT" is
indicated on the LCD.
1-26 (No.MA153)
Thermistor's temperature data readout
Press the [SEL] key
: Data in the temperature sensor in the system control
is read every 5 seconds and displayed in hex numbers.
DVD unit check mode
Press the [SEL] key
(See section "5.1.4 DVD unit check mode" for details.)
Running mode: For use in running tests.
Press the [SEL] key
Memory check
Press the [SEL] key
: The remaining data capacity of the disc is displayed on the LCD.
Initialize user set data
Press the [SEL] key
: The system control EEPROM is initialized except for the
loading/ejection error history.