JVC KD-ADV6160 Service Manual page 10

Dvd/cd receiver

Hide thumbs Also See for KD-ADV6160:

3.1.9 Removing the switch board

(See Figs. 12 to 14)

• Remove the front panel assembly.

(1) From the back side of the front panel assembly, remove the

five screws P attaching the rear cover. (See Fig.12.)

(2) Release the ten joints i attaching the rear cover to the front

panel assembly. (See Fig.13.)

(3) Take out the switch board while lifting the switch board

from the front panel assembly little by little. (See Fig.14.)

Reference:

Remove the volume knob from the front side of the front panel

assembly at the same time.

Note:

Do not lose the compression springs when removing the

switch board. (See Fig.14.)

1-10 (No.MA153)

Rear cover

Front panel assembly

Fig.12

Rear cover

Fig.13

Switch board

Compression spring

Fig.14

Front panel assembly

Compression spring