For the DSRR, the refrigeration unit should already be installed in the unit. (Refer to DSRR Assembly Diagram) 7. The waste outlet will need to go under the DSR and through the ground to the services that are supplied. 8. Once this is achieved then place the shroud on top of the base and use the four fixing holes to attach both together down the bottom of the unit.
Page 5
TITLE: Drinking F Drawing: UNLESS OTHERWISE SPEC DIMENSIONS ARE IN MILLIM Refer to next page for DSRR (Refrigerated) Assembly Diagram Australia’s Finest Stainless | britex.com. DSR & DSRR Installation Guide | QID 1.8 | Rev 3 | 18 May 2023...
Page 6
With 3 Pin Plug Supplied Chiller Unit Mounting Plate TITLE: Fixed Base Frame 11mm Fixing Holes Drawing: UNLESS OTHERWIS DIMENSIONS ARE IN Australia’s Finest Stainless | britex.com. DSR & DSRR Installation Guide | QID 1.8 | Rev 3 | 18 May 2023...
The cover itself should be wiped over with a damp cloth. • When servicing/cleaning the unit please be aware that the unit is pressurised and contains gas. Australia’s Finest Stainless | britex.com. DSR & DSRR Installation Guide | QID 1.8 | Rev 3 | 18 May 2023...
Page 8
Check and test power supply Water not cold Clean cabinet louvers (if fitted) and Poor ventilation condenser fins. These units need ventilation Australia’s Finest Stainless | britex.com. DSR & DSRR Installation Guide | QID 1.8 | Rev 3 | 18 May 2023...
- This unit MUST be installed with a Pressure Relief Valve (supplied) - This unit MUST be installed with Ventilation Pressure Relief Valve for CWU-INT Australia’s Finest Stainless | britex.com. DSR & DSRR Installation Guide | QID 1.8 | Rev 3 | 18 May 2023...
By purchasing our product, you agree to these terms and conditions. We appreciate your business and look forward to providing you with high- quality products and services. Australia’s Finest Stainless | britex.com. DSR & DSRR Installation Guide | QID 1.8 | Rev 3 | 18 May 2023...
Page 12
(02) 9531 2100 t (08) 9249 5464 t (07) 3363 2400 t 1300 764 744 e vic@britex.com.au e nsw@britex.com.au e wa@britex.com.au e qld@britex.com.au e sa@britex.com.au DSR & DSRR Installation Guide | QID 1.8 | Rev 3 | 18 May 2023...
Need help?
Do you have a question about the DSR and is the answer not in the manual?
Questions and answers