ELECTRIC FAN OVENS Installation – Use - Maintenance MOD. BRIO43/X N CGE23 N CPE434 N GASTRO23/X N CPE643F N BRIO 43S/X N CGE11 N CPE644 N BRIO64/X N CGE11 N 230/1 CPE 644 N 230/1 CGE611 NP CPE664 NP Doc.n° 252.386.00 Edition...
Page 3
UK - INSTALLATION – USE - MAINTENANCE ..........................11 GENERAL PRESCRIPTIONS ..................................11 DISPOSAL OF PACKING AND OF THE APPLIANCE ................................12 SAFETY AND CONTROL DEVICES ....................................12 INSTRUCTIONS FOR INSTALLATION ................................12 REMINDERS FOR THE INSTALLER ....................................12 REFERENCE STANDARDS AND LAWS .................................... 13 UNPACKING ..........................................
UK - INSTALLATION – USE - MAINTENANCE Identify the specific appliance model. The model number is detailed on the packing and on the GENERAL PRESCRIPTIONS appliance dataplate. DO NOT OBSTRUCT ANY AIR VENTS OR READ THIS MANUAL CAREFULLY. IT DRAINS PRESENT ON THE APPLIANCE. PROVIDES IMPORTANT INFORMATION FOR SAFE INSTALLATION, USE AND This device emits a sound pressure level less than...
In the case of delivery by our opinion the - the straps (in Polypropylene - PP). equipment can also be devoid of packaging, other types of packaging can be provided according to the APPLIANCE destination and / or customer requirements. The appliance is manufactured 90% from recyclable MEANS NECESSARY FOR HANDLING metals (stainless steel, aluminium sheet, copper..
Do not obstruct any air vents or drains present on Install a mechanical filter and a shut-off valve the appliance. upstream of the appliance in an easily accessible point. Do not tamper with appliance components. It is necessary to have a supply of drinking water with hardness<10 °F to avoid circuit blockage.
READ THIS MANUAL CAREFULLY. IT PROTECTIVE EARTH EARTH BONDING PROVIDES IMPORTANT INFORMATION CONNECTIONS FOR SAFE INSTALLATION, USE AND MAINTENANCE OF THE APPLIANCE. Connect the appliance to an efficient ground circuit. THE MANUFACTURER WILL NOT BE Connect the earth conductor to the terminal with LIABLE FOR ANY DAMAGE OR INJURY the symbol next to the main terminal board.
INSTRUCTIONS FOR 10. PROLONGED DISUSE MAINTENANCE Before any prolonged disuse of the appliance, 12. REMINDERS FOR THE MAINTENANCE proceed as follows: TECHNICIAN - Clean the appliance thoroughly. - Rub stainless steel surfaces with a cloth soaked in THE MANUFACTURER WILL NOT BE vaseline oil to create a protective film.
DISCONNECT THE APPLIANCE ELECTRIC SUPPLY, BEFORE CARRYING OUT ANY OPERATION. After replacing an electrical system component, check it is correctly wired. VENTILATED OVEN Replacing the heating element - Open the door. - Remove the inner panel. - Remove and replace the component. - Refit all parts.
Page 10
PANNELLO DI CONTROLLO - CONTROL PANELS - PANNEAU DE CONTROLE – SCHALTBRETT - PANEL DE CONTROL TERMOSTATO THERMOSTAT THERMOSTAT THERMOSTAT TERMOSTATO TERMOSTATO THERMOSTAAT THERMOSTAT- INDICADOR SPIA THERMOSTAT THERMOSTAT TESTIGO LAMPJE KONTROLL LUMINOSO DO TERMOSTATO SIGNAL LIGHT LAMPE TERMOSTATO THERMOSTAAT LÄMPCHEN TERMOSTATO LIGAR/DESLIGA TIMER ON/OFF...
Page 11
TAB1 - DATI TECNICI - TECHNICAL DATA - TECHNISCHE DATEN - CARACTERISTIQUES TECHNIQUES - DATOS TECNICOS- TECHNISCHE GEGEVENS Dati tecnici apparecchiature elettriche - Dati tecnici aTechnical data of electric appliances - Caractèristiques techniques des appareils electriques - Technische Daten Elektrogerate - Datos técnicos de los equipos eléctricos - Technische gegevens elektrische apparatuur TENSIONE DI POTENZA TOTALE...