Maintenace And Repair - Pro Spot VAC-U-PULL Instruction Manual

5 .0 MAINTENANCE AND REPAIR
All maintenance and repair work must be carried out by trained personnel who have read this manual and
the operating instructions .
The following are recommendations for possible repairs to the machine .
The machine should be located in a place that is preferably flat, free of scratches, cracks and cracks, and
as clean and dust-free as possible .
The foam acts as a sealant and should be checked to ensure that it is watertight when the vacuum is applied .
If it is in poor condition, always use original consumables to ensure correct operation of the equipment .
If the problem persists, call the Pro Spot technical assistance service .
Check the condition of the chain and its fasteners before exerting traction forces on them . In case of damage
or wear, always use original consumables to ensure correct operation of the equipment .
7
All Info Copyright © Pro Spot International Inc. 2023