Remote Control - Philips 27PT5245 User Manual

STANDBY y y Button
Press to turn the TV on or off (standby).
You also can turn on the TV by pressing
the CH (annel) 8/9 buttons on the
front of the TV.
SLEEP Button
Press to select a time period (10 min-
utes to 120 minutes in 10-minute incre-
ments) after which the TV will turn itself
off. Details are on page 21.
SMART PICTURE Button
Press to select one of the four picture
settings (MOVIES, SPORTS, WEAK
SIGNAL, or PERSONAL).
Details are on page 16.
SMART SOUND Button
Press to select one of the four sound
effect settings: THEATRE, PERSONAL,
VOICE, or MUSIC.
Details are on page 28.
MENU Button
Press to see the TV's on-screen menu.
Press to go to the previous menu or to
remove a menu from the screen.
VOL (volume) +/- Buttons
Press to adjust the TV sound level.
DISPLAY Button
Press to see the current channel number
on the TV screen. Press to remove a
menu from the screen.

Remote Control

STANDBY MUTE
SLEEP CALL BOOKMARK
SMART
MTS TV/AV
PICTURE
EXIT
SMART
SOUND MENU
CH
VOL
VOL
CH
1
2
4
5
7
8
0
9
MUTE Button
Press to cancel or restore the TV sound.
Pressing the volume buttons (VOL 8/9
or VOL +/-) also will cancel mute and
restore the sound.
CALL Button
Press to switch between the two channels
you bookmarked.
BOOKMARK Button
Press to mark two channels that you can
recall with the CALL button.You cannot
bookmark the Audio/Video In channels
(VIDEO 1/S-VIDEO, VIDEO 2, and DVD).
TV/AV/EXIT Button
Press to select TV channels or the
Audio/Video In channels (VIDEO 1/S-
VIDEO,VIDEO 2, or DVD). Press to
remove a TV menu.
MTS Button
Press to select a sound mode if available
3
with the TV programming: MONO,
STEREO, SAP, or MONO+SAP.
6
Details are on page 30.
CH (channel) +/– Buttons
9
Press to select memorized TV channels.
Number Buttons
Press to select TV channels directly. For
single-digit channels, press "0" first, then
the number of the channel.
For channels 100 and above, press the 100
button first, then the next two numbers of
the channel. For example, to choose chan-
nel 115, press the 100 button, then
Number 1, then Number 5.
(You can select channels above 69 only if
you have Cable TV. Make sure TV/CABLE
is set to CABLE. Details are on page 11.)