Daikin DAR09 Service Instructions Manual page 13

PRODUCT IDENTIFICATION
Daikin® BRAND X-R410A 14 SEER SINGLE STAGE NOMINAL CONDENSERS
Model/Rev
DX14SN0[18-60]1AA
DX14SN0241AB
DX14SN0251BA
DX14SN0191AB
DX14SN0[30-43]1AB
DX14SN0[18, 24]1BA
DX14SN0[30-43]1AC
DX14SN0[48, 60]1AB
DX14SN0[48,60]1AC
DX14SN0181BB
DX14SN0241BC
DX14SN0[36,42]1AD
DX14SN0181BC
DX14SN0191AC
DX14SN0251BB
DX14SN0241BB
DX14SN0[37,43]1AD
DX14SN
Initial release new models of Daikin® Brand 14 SEER standard condenser 5mm
architecture with updated scroll compressors.
Replaced 1/12 hp fan motor with 1/8 hp fan motor.
Changed compressor from K5 to K6, Changed coil slab from 25" tall to 30" tall, Changed
louvers from 24" tall to 29" tall
Remove HS Kit from Control Panels of condenser units with updated
ZP14K6E scroll compressors.
Change from copper wound motor to aluminum wound motor
Convert ANX13 / 14 1.5 and 2 ton models to Rechi compressors.
These will be a copy of GSX Rechi models.
Refrigerant charge reduction
Create new Motor 0131M00807 & Replace 0131M00061 with 0131M00807
Switching 3-legged and 4-legged compressors in 13SEER and 14SEER condensers to
those with improved overload protection (OLP).
Charge Optimization for 14 SEER 2T lineup
Charge Optimization for 14 SEER 3T and 3.5T condenser units.
Replaced motor 0131M000266 with 0131M00811
Replaced motor 0131M000266 with 0131M00811
Refrigerant Charge Reduction
Charge Optimization for Southwest 3T and 3.5T lineup
Description
13
DX14SN*