Table of Contents
Advertisement
Chapter 3
Pre-installation Instructions
Perform the steps below before you open the server or before you remove or replace any
component.
• Back up all important system and data files before performing any hardware configuration.
• Turn off the system and all the peripherals connected to it.
3-1
Replacing the Power Supplies
CAUTION!
• In order to reduce the risk of injury from electric shock, disconnect AC power from the power shelf
before removing it from the system.
3-1-1 Replacing the Power Supplies
Follow these instructions to replace the power supplies:
1.
Disconnect the grounding cable connecting the power shelf to the rack.
2.
Push the power supply latch down and at the same time pull out the power supply by using its
handle.
2
3.
To install the power supply, insert the replacement power supply firmly into the chassis.
Rack System Hardware Installation
1
Hardware Installation
- 14 -
Advertisement
Table of Contents
