Advertisement
8. Set the trimmer driving bar and click spring.
9. Set the bottom cover and tighten it with a screw.
10. Attach the connecting bar to housing C.
11. Set housing C and attach the dial and the dial-fixing button
with tightening a screw. And attach the dial cover.
NOTE: Make sure that the rack is set on the lowest
position and the dial shows "1" at the center.
After assembling the unit, confirm the smooth up and down
operation for attachment. And confirm if the dial shows "20"
when the attachment is the highest position.
7
ER220-E2 / ER221-E2
Advertisement
