Modesty
Leg frame
C
B
Fittings supplied
Part A
Minifix bolts M6
Quantity=18
Corner leg
A
Top
Part C
Part B
M6 Flat head bolt
Minifix cover
Quantity=18
Quantity = 6
Atmosphere Cantilever Crescent
Modesty
Leg frame
Tools required
Pozi head screw driver
Allen key (4mm)
Assembly steps
1. Place the top upside down.
Screw six Part A into the top
(for modesty panel attachment).
2. Screw six Part A into the
corner leg, connect to one modesty
and tighten three minifix cams.
3. Connect the second modesty to the
corner leg, and tighten three
minifix cams.
4. Lift and locate the attached modesty
panels and corner leg onto the six
Part A in the top. Do not tighten
the six minifix cams.
5. Screw six Part A into the
uprights on the two leg frames.
6. Fix the leg frames onto the desk top,
locating the three Part A on
each leg frame with the three minifix
cam holes on each modesty panel.
Tighten minifix cams to secure the
leg frames to each modesty panel.
7. Screw six Part B through the leg
frames into the top.
8. Tighten the six minifix cams in the
modesty panels.
9. Push Parts C into the appropriate
places to finish the desk.
Assembly instruction leaflet no. 59 A