Logitech 3D MOUSE & HEAD TRACKER Technical Reference Manual page 65

Table of Contents

Advertisement

Select MS-Compatible Format (*V)
The *V command causes the 3D Mouse to switch to a 100% compatible
Microsoft 2-button mouse format. Also, it allows the 3D Mouse to
support a third button transparently. The middle mouse button is
supported by simultaneously pressing or releasing both the left and right
buttons.
Select 5-Byte (MSC) Format
This command is not supported in the current implementation of the 3D
Mouse.
Send Copyright (*c)
The *c command causes the control unit to transmit an ASCII string of
up to 127 characters to the host computer. The string contains copyright
information about the control unit firmware, and is formatted as shown
in Table 6-12.
Figure 6-12. Send Copyright String
Name
Bit6
Byte n
A6
Where in Table 6-7,
A6..A0 = Represents the ASCII code of the n
The ASCII string transmitted is
<CR><LF>JA 1.0 © 1991 Logitech<NUL>
The transmitted string is updated in each new firmware release.
Application Programming Interface
Bit5
Bit4
Bit3
A5
A4
A3
Bit2
Bit1
Bit0
A2
A1
A0
th
character transmitted
53

Advertisement

Table of Contents
loading

Table of Contents