Advertisement
Available languages
Available languages
1 1
9.Just remount to the step 7,change
part① to right and part② to left and
then fix them with screws④ .
install part③ as the figure below .
10.Take off the part ①, place it at side
for use as show figure Ⅰ . Move the
door to appropriate position, adjust part
and door,
then fix part ②
②
screws as show the figure Ⅱ. (Please
hold door by hand when installing).
Reverse part①
by 180°and install it
onto the left corner of the door as show
the figure Ⅳ .Connect the wire
connector ④
as show the figure
Ⅲ ,and then fix right upper hinge
cover ③ as show the figure Ⅱ(which
is in the plastic bag) . Finally mount
part ⑤ as show the figure Ⅴ.( which
was taken down in step 2)
EN
Ⅰ
①
Finally
Ⅲ
④
Ⅴ
by
11.Finally install part ① and part ②
(both of which are taken down in step
3) in the refrigerator body as the
picture below.
Ⅱ
②
③
Ⅳ
⑤
①
②
Advertisement
