Status Displays, Picture Controls 25 - Magnavox 20MC4304 Owner's Manual

T1056(06)_2006_1.qx3
Status Displays
To see the Videotape Counter, Clock, or Channel number
on the screen in TV/VCR mode, press DISPLAY repeatedly.
The following will occur when Closed Captions are OFF.
1
Press DISPLAY once to see the Videotape
counter. After five seconds, only the counter will
remain on the screen.
STOP
SP COUNT 0:12:34
2
Press DISPLAY again to see the current time
and TV channel. After five seconds, only the clock
and channel number will remain on the screen. To
clear them, press DISPLAY again.
STOP
SP
●
When Closed Captions are ON, the status displays will
appear for only five seconds. Then all the information will
clear from the screen. Closed Caption details are on page 41.
Picture Controls
Follow these steps to adjust the TV/VCR/DVD's brightness,
sharpness, tint, color, or contrast.
1
Press PICTURE.
Within five seconds, press ▲ or ▼ to select the
2
picture control you want to adjust.
You can select BRIGHT, SHARPNESS, TINT, COLOR,
or CONTRAST.
BRIGHT
3
Within five seconds, press s or B to adjust the
picture control.
BRIGHT
SHARPNESS to make soft
TINT
COLOR
CONTRAST
10/12/04 11:57 AM Page 25

Status Displays, Picture Controls 25

COUNT 0:12:39
5:40 PM
CH 2
s
to decrease brightness
to add purple
to decrease color
to decrease contrast
1-2
5:40 PM
CH 2
1
2-3
• Degaussing: Magnetism from
B
to increase brightness
to make clear
to add green
to brighten color
to increase contrast
STANDBY-ON PICTURE SLEEP SELECT
1 2 3
CH.
4 5 6
7 8 9
VOL.
+100
0 +10
SPEED C.RESET
ZOOM
MUTE
PLAY
STOP
DISC
RECORD
MENU
DISPLAY
ENTER
SETUP TITLE RETURN
CLEAR SEARCH MODE REPEAT REPEAT
A-B
MODE AUDIO SUBTITLE ANGLE
STANDBY-ON PICTURE SLEEP SELECT
1 2 3
CH.
4 5 6
7 8 9
VOL.
+100
0 +10
SPEED C.RESET ZOOM
MUTE
PLAY
STOP
DISC
RECORD MENU
DISPLAY
ENTER
SETUP TITLE RETURN
CLEAR SEARCH MODE REPEAT REPEAT
A-B
AUDIO SUBTITLE ANGLE
MODE
Helpful Hint
nearby appliances and speakers
might affect the color of the TV
picture. If this happens, move the
TV/VCR/DVD away from the appli-
ance. If the color is still not correct,
turn off the power for 30 minutes
(for 27MC4304) or disconnect the
power cord for 30 minutes (for
20MC4304).After 30 minutes, try
using the unit again.