AEG L 99699 HWD User Manual page 34

34 www.aeg.com
Message
The display tells to check the
drain filter: the appliance
does not drain the water.
The display tells to check the
door.
The display tells there is a
water alert.
The display tells that the
main supply is unstable.
At the end of the washing
cycle the display tells that
too much detergent was
used.
The display tells to check the
air filter (the indicator
flashes and the acoustic sig-
nal operates)
Problems without alarm messages
Problem
The programme does not
start.
Possible solution
Make sure that the water tap is not clogged or is furred
with lime-scale.
Make sure that the filter of the inlet hose and the filter of
the valve are not clogged. Refer to "Care and cleaning".
Make sure that the inlet hose is not damaged.
Make sure that the connection of the water inlet hose is
correct.
Make sure that the drain hose is not damaged.
Make sure that the drain filter is not clogged. Clean the
filter, if necessary. Refer to 'Care and cleaning'.
Make sure that the connection of the drain hose is cor-
rect.
Make sure that the appliance door is not open or closed
correctly.
The anti-flood device is activated:
• Disconnect the appliance.
• Close the water tap.
• Contact the service centre.
Wait until the mains supply is stable. The appliance auto-
matically starts operating.
This is not a failure but a suggestion for next wash to de-
crease the detergent quantity.
Make sure that the filter drawer is correctly inserted.
Possible solution
Make sure that the mains plug is connected to the mains
socket.
Make sure that there is not a damaged fuse in the fuse
box.
Make sure that the you have touched Start/Pause.