Default Program - Magnum H64 Installation Instructions & User Manual

Default programming
Default programming (Adjustable in the App)
(Cooling mode)
Cooling mode
Wake
up
Morning Leaving home
Outdoor
6:00 25°C 8:00
Heating mode
(Heating mode)
Wake
up Morning Leaving home
Outdoor
6:00 20°C 8:00
Sensor selection:
S-r: Control via room sensor
The thermostat is controlled by an internal sensor and displayed as room temperature.
r-F: Control via room sensor with floor sensor limit
The thermostat controls based on the actual room temperature detected by the internal sensor and
compares it to the floor temperature limit set by parameter 8. If the floor temperature exceeds the limit, the
system stops working and alarms E4. If the floor sensor is not connected in r-F mode, it gives alarm E2.
S-F: Control via floor sensor
The thermostat controls via an external sensor and displays the room temperature.
Back home Back home
28°C 11:00 25°C
Back home
Back home
16°C 11:00 20°C
Leaving home Back home
Outdoor
14:00 28°C 18:00
Leaving home
Outdoor Back home
14:00 16°C 18:00
17
43
Back home Sleep Night
25°C 22:00
Back home Night
Sleep
20°C 22:00
z
z
28°C
z
z
16°C