Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for XONTEL XT-3000AX
Summary of Contents for XONTEL XT-3000AX
- Page 1 11AX 3000Mbps Ceiling Wireless AP XT-3000AX User quick guide...
-
Page 2: 1/Product Introduction
1/Product introduction LED indicator de nition Front Back One LED Indicator Designation Normal Status Explanation Green Light System boots up successfully SYSTEM/WIFI LED Blue light WIFI boots up successfully Designation Three LED Indicator Normal Status Explanation Bright System boots up successfully SYSTEM LED System reset default Flashing... -
Page 3: 2/Device Installation
2/Device installation... - Page 4 3/Device connection Bypass mode topology Cloud Server INTERNET Router POE Switch Laptop Mobile phone Monitor AC Gateway mode topology Cloud Server INTERNET AC(AC gateway all in one) POE Switch Laptop Mobile phone Monitor Tips: If the AP supports 24V POE, pls use 24V PoE switch or POE adapter; if the AP is a standard 48V POE device, please use a standard IEEE802.3at POE switch or POE adapter.
- Page 5 4/Device management Management from WEB UI Connect PC by wireless (1)、To connect an AP wirelessly, you need set the IP address of the TCP/IP properties of the wireless network card to 192.168.188.X (X is number range of 2-252) rst, so that the AP and PC in the same IP segment, and set the subnet mask to 255.255.255.0, as shown in the following picture: (2)、After setting the IP address of PC, connect PC with AP in wireless, double-click "Wireless network Connection", in the pop-up wireless SSID list,...
- Page 6 Connect PC by wired port Using the wired connection, set the IP address of the TCP/IP properties of the wired network card to 192.168.188.X (X is number range of 2-252), and the PC will be the same IP segment as AP.
- Page 7 AP mode 1.Use Internet Explorer to visit http://192.168.188.253, pop up the login dialogue box shown in the following picture, input the default login password: xontel, then press “Login” to enter the wireless AP’s management user interface page. Input password Login 2.By default it is in Fit AP mode, users need click the button...
- Page 8 Operation Mode AP Mode Fat AP Uptime 01:05:39 Device Information Device Description LAN Information WIFI Information IP Mode Get IP From AC Status Lan IP 192.168.188.253 SSID XonTel_2G CPU Usage Click Settings Subnet 255.255.255.0 Channel AC Address 172.16.0.1 Encrypt Open Memory Usage MAC Address 44:D1:FA:75:BF:3F...
- Page 9 5.Enter AP Mode setup page,choose “Get IP from AC” in connection type, click Next. AP Mode √ LAN Settings IP Mode Get IP From AC Static IP Get IP From AC Get IP From Gateway Next 6. Enter Wi setup page,set up SSID, Channel, Encryption parameters as shown below: AP Mode √...
-
Page 10: Device Management
Internet connection and status view IP settings: After the con guration is completed, the wireless AP will restart and enter the Operation Mode you set. Then change the IP address of your computer to Obtain an IP address automatically, computer and other wireless devices can connect to the AP for Internet access. -
Page 11: Wireless Testing
Con gure Reboot Modify Password Upgrade Time Home Con gure Wizard Save the con guration le to your computer Backup WIFI Select Restore Network Restore the factory default settings ,please press this button Reset Default Manage Wireless testing 1.Use Laptop or mobile phone to test whether the wireless network can surf the Internet: click wireless network , select the wireless SSID, enter the password to connect the wireless AP, test whether you can surf the Internet. -
Page 12: Other Mode
Other mode Current Mode Gateway Repeater Mode WISP Mode AP Mode Gateway Mode Realize router function, WAN port connect with modem (ADSL or Fiber) , or WAN port connect internet by dynamic or static IP type. Repeater mode Realize wireless bridge and forwarding without compatibility matching with the upper device. WISP Mode Wireless ISP clients connect to the wireless base station by wireless, to realize local LAN inter- net connection sharing. - Page 13 5/Use mobile phone to login XonTel_5G When mobile phone connect to AP through wireless, need to con gure static IP according to below steps XonTel_5G XonTel_5G XonTel_5G XonTel...
- Page 14 DNS. XonTel_5G XonTel_2G XonTel_5G XonTel How to set static IP for IOS system mobile phone Click "settings", choose "Wi-Fi", click exclamation mark after connect wireless signal successfully, setup the static IP 192.168.188.X(X can not be 253 or 252), then input gateway IP,...
-
Page 15: Faq And Solutions
FAQ and Solutions Q1: Forget login name and password ? A1: Reset to factory default settings: press the reset button for above 10 seconds and release it , the device will reboot and reset to factory default settings automatically. Q2: Can not Login wireless AP management WEB interface ? A2: 1.Check if PC with static IP and if this IP is in the same IP segment of AP, make sure it is not set to other IP range.