Download
Share
Print this page
  1. Manuals
  2. Brands
  3. XONTEL Manuals
  4. Wireless Access Point
  5. XT-18AP
  6. User manual

XONTEL XT-18AP User Manual

Dual band 1200mbps ceiling ap poe
Hide thumbs Also See for XT-18AP:

Advertisement

Quick Links

Download this manual

User Manual

XT-18AP-Dual band 1200Mbps Ceiling AP
POE
This is the user manual of XT-18AP, Dual band 2.4G &5.8G, 1200Mbps Ceiling AP, which
will approximate guide you how to set and apply the Ceiling AP, it provide a convenient
graphical interface for network construction and maintenance person, as well as a user
through a simple and accurate operation, and configuration management of the ceiling
wireless access point.

Advertisement

loading

Related Manuals for XONTEL XT-18AP

Summary of Contents for XONTEL XT-18AP

  • Page 1: User Manual

    User Manual XT-18AP-Dual band 1200Mbps Ceiling AP This is the user manual of XT-18AP, Dual band 2.4G &5.8G, 1200Mbps Ceiling AP, which will approximate guide you how to set and apply the Ceiling AP, it provide a convenient graphical interface for network construction and maintenance person, as well as a user through a simple and accurate operation, and configuration management of the ceiling wireless access point.

  • Page 2: Hardware And Operation Mode Instruction

    Hardware and Operation mode Instruction L E D i n d i c a t o r : G r e e n : P o we r I n d i c a t o r B l u e : W i F i I n d i c a t o r A P I n t e r f a c e : RST: Reset Button, it make AP revert to default data after press it 15 seconds.
  • Page 3 ceiling AP wired/wireless. Pls note, if the PD Wireless AP support 24V passive PoE, then the PoE switch should be 24V Passive PoE,. If the PD wireless AP support 48V IEEE 802.3af standard PoE, m the PoE switch should comply with 802.3af 48V PoE standard.
  • Page 4 Th e d i a g r a m o f L A N c a b l e c o n n e c t i o n s h o we d a s f o l l o w: ：...
  • Page 5 P 5 Setting of computer’s IP address 3) Input 192.168.188.253 into IE browser, then pop up the login page, the default login user name: Admin, Passwords: admin, pls do following P6 P6 Login...
  • Page 6 : WEB GUI interface Setting: 1) Status After login, then P7 Device Status will be showed: P7: Device Status In this ceiling wireless AP, the default operation mode is AP mode. Then in 2.4G Wireless Setting, GUI configuration page showed as below: User can configure the SSID, password, band width, channel here, then Apply to finish.
  • Page 7 P8. 2.4G Wireless setting 5.8G Wireless Setting GUI configuration setting showed as P8: P9 5.8G Wireless Setting LAN Setting to configure the DHCP or Fix IP...
  • Page 8 P10 LAN Setting AP location setting: can mark where the AP set up, and AP name as P11: P11 AP Position setting...
  • Page 9 2) Wizard Configuration: Click Wizard in Status page, will pop up following page to configure the operation mode: There are four operation mode of this ceiling wireless AP, and there are explanation for each operation mode for better application. P12 Operation mode 1.
  • Page 10 P14 Wireless Setting in Gateway Mode When click Next, then will complete the Gateway mode setting and show following picture: Complete the setting in Gateway Mode...
  • Page 11 When return to Status, the page showed as follow: P16 Status in Gateway Mode 2. WiFi Repeater mode Click WiFi Repeater operation mode in Wizard, then following page will pop up, and choose the right SSID to bridge, then next. P17 Repeater Mode...
  • Page 12 After click Next button, then should configure the wireless settig as follow, then click Next to finish: P18 Wireless Setting in Repeater Mode Click Return button, will back to Status, show Repeater mode data, show fail or success and user can configure this data in this page if required.
  • Page 13 P20 Wireless Relay Setting 3. AP Operation mode: Set the wireless data, AP Location info as required, then click next to continue and enter into LAN setting. After LAN setting, complete the AP mode configuration and back to Status:...

  • Page 14: Advanced Setting

    P26 Wireless setting in AP Mode P21 LAN Setting in AP Mode P22 Status in AP Mode 3) Advanced Setting: In advanced setting, user can check the ceiling AP’s firmware version, working status, 2.4G wireless, 5.8G Wireless, LAN Status,...
  • Page 15 upgrade firmware, Reset... Let’s Click Advanced Setting in status page, will show return home, Setup Wizard which we showed before. Let’s shown mode in Device Status, 2.4G Wireless, 5.8G Wireless, Network and Management. P23 Device Status Device Status: In this page, mainly to check the ceiling AP’s status in firmware version, 2,4G Wireless, 5.8G Wireless and LAN status: P24 2.4G Wireless Status...
  • Page 16 P25 5.8G Wireless Status P26 LAN Status 2.4G Wireless Setting: In this part, will show the 2.4G Basic Setting, Virtual AP, Access control and Advanced Setting:...
  • Page 17 P33 Basic Setting in 2.4G Wireless P27 Wireless Analyzer Virtural AP: There are 3 virtural AP in 2.4G wireless, if need virtural SSID, then users can configure it showed in following picture: P28 Virtual AP 2.4G Access Control: Mainly show MAC allow or deny:...
  • Page 18 P29 MAC Access Control P30 Network Setting...
  • Page 19 P31 Tag VLAN Setting Management: In this part, show the system time, Logs, upgrade firmware, system, user info. And we show System time, how to upgrade firmware and system page to users: P32 System Time...

  • Page 20: Share Internet And Obtain Ip Address Automatically

    P33 Firmware Upgrade P34 System info Share Internet and Obtain IP address automatically Set computer’s TPC/IP as Obtain an IP address automatically, Obtain DNS server address automatically as following picture showed.
  • Page 21 The computer will obtain the IP address from router or base station to get Internet. Tr o u b l e S h o o t i n g : F 1 the Failure phenomenon and solution Failure phenomenon Solution Pls make sure the PoE module connection is right.