When first time power on the device, we need to configure it on a PC via a network cable. Connect XonTel XT-18AP WAN port to the PoE adapter (PoE injector) PoE port. And then connect its LAN port to a PC. Details shown in the picture.
Ethernet- Properties – Double click IPv4 – change IP address to 192.168.10.10; Subnet Mask to 255.255.255.0; Default Gateway to 192.168.10.1. 2)Open the web browser, enter 192.168.10.1 to the log in page. 3)This is the log in page. Please fill in with the parameters below: Initial password: xontel...
Page 7
4)After log in, click Wizard and choose Router mode 5)WAN settings: Choose DHCP, and click Next.
Page 8
6)LAN settings: IP address is free to change. In this manual, we’ll use default 192.168.10.1. Click Next. 7)Wi-Fi 2.4G settings: SSID is also free to change. We can keep Country and Channel as default. Click Next.
Page 9
8)Wi-Fi 5.8G settings (Available on dual-band APs): SSID is also free to change. We can keep Country and Channel as default. Click Next. 9)Click Finish and its done.
Network Configuration 1. LAN settings From here you can configure Access Point LAN port network settings. In XT-18AP GUI interface to Network ---→ LAN 2. WAN settings From here you can configure Access Point WAN port network settings. In XT-18AP GUI interface to Network ---→ WAN...
3. Wireless settings From here you can configure Access Point SSID settings for both 2.4GHZ wireless and 5.8GHZ wireless. In XT-18AP GUI interface to Network ---→ Wireless 4. DNS settings From here you can configure Access Point DNS settings. In XT-18AP GUI interface to Network ---→ DNS...
To prevent a client from accessing internet choose the desired client then click on the icon System Configuration 1. Manage Configuration From here you can import or export XT-18AP configuration and reset XT-18AP to factory default mode. In XT-18AP GUI interface to System ---→ Manage Config...
2. Upgrade From here you can upgrade XT-18AP. In XT-18AP GUI interface to System ---→ Upgrade 3. Reboot From here you can reboot XT-18AP or schedule auto reboot for XT-18AP. In XT-18AP GUI interface to System ---→ Reboot...
5. Remote From here you can set external IP address on XT-18AP to login remotely. Please note that you have to make port forward for the XT-18AP from the main router first. In XT-18AP GUI interface to System ---→ Remote 6.
7. Time Setting From here you can configure XT-18AP time settings. In XT-18AP GUI interface to System ---→ Time Setting 8. Logs From here you can check XT-18AP logs. In XT-18AP GUI interface to System ---→ Logs...
From here you can configure a list of allowed IP addresses which can connect to your network. In XT-18AP GUI interface to Firewall ---→ IP Filter 2. MAC Filter From here you can configure a list of allowed MAC addresses which can connect to your network.
From here you can to prevent users from accessing websites that provide content that is potentially harmful, or not work-related. In XT-18AP GUI interface to Firewall ---→ URL Filter 4. Port Forward From here you can configure port forwarding in the XT-18AP In XT-18AP GUI interface to Firewall ---→ Port Forward...
ARP Spoofing and other ARP attacks by denying network access to a device with matching IP address in the Binding list, but unrecognized MAC address. In XT-18AP GUI interface to Firewall ---→ ARP Binding To bind network device, click on the icon...
DMZ (demilitarized zone). In XT-18AP GUI interface to Firewall ---→ DMZ Settings 7. DDOS protection settings From here you can enable attack resistance in XT-18AP to make the access point more secure. In XT-18AP GUI interface to Firewall ---→ DDOS protection...